Post

New on buildplates.fyi / willitstick.fyi: a large-object warp test (beta) The standard test tells you whether a filament grips a plate. It can't tell you whether a part as long as your bed stays flat. The new test does.

15/10/26, 5:38 am0 reposts0 likes

buildplates.fyi

@buildplates.fyi

Print a plain bar, 30 × 20 mm, stretched to 90% of your printer's X and placed along the front of the plate. Then record whether the part lifted, the plate lifted, or neither. It even warps in PLA, so you don't have to print with the expensive warp-prone stuff.

buildplates.fyi

@buildplates.fyi

Pick your printer at buildplates.fyi/submit?test=large-object-v1 and the form tells you how long to print the bar, where it goes, and which file to start from.

buildplates.fyi

@buildplates.fyi

Bambu Studio: one for the H series, one for the 256mm Bambu printers OrcaSlicer: one for everything else PrusaSlicer: one for Prusa printers Other slicers: the STL plus How to Test's settings table All four 3MFs are on Printables. MakerWorld has the Bambu Studio profiles and the OrcaSlicer file.

buildplates.fyi

@buildplates.fyi

⚠️ It's a beta. We may still change the part, its settings or how lift is measured, and results from before a change may get deleted or marked invalid.